Repair Tips



BMW Z4 (E85) Cylinder Requirements

BMW Z4 (E85) cylinders must be removed from the top frame as a complete unit. Do not at any time remove the rotating arms from the cylinder as this can damage the pinion gear. After removing the cylinder assembly from the top frame, remove all hardware and sensors...

read more

Hose Coupler Installation Requirements

Cabriolet Hydraulics Hose Couplers fit only factory installed hoses with 1.8mm and 2.0mm internal (bore) diameters and 4.5mm outer diameters. Check printing on your damaged OEM hose to identify the actual hose bore diameter. Couplers will fit hoses with the following...

read more