We need the entire hydraulic assembly, which includes the pump, the lines, and the actuators. Do not send the wiring harness unless there is a problem with the microswitches, which we can repair at an extra cost.
- Disconnect your wiring harness and microswitch assembly from the spoiler drive components and leave it attached to the engine cover. Doing this will save you time when removing and reinstalling the spoiler drive.
- Disconnect the 2 main leads from the pump motor
- Remove the entire plastic microswitch assembly from the right side actuator housing by locating and unscrewing the tiny Torx screws.
For 997 spoiler drives: do not remove the plastic wavy pump mounting bracket, it must be included with the pump.
Refer to preparation and shipping instructions below for more details.
Porsche 997 Spoiler Drive
Porsche 996 Spoiler Drive
Shipping Instructions
- Make sure to pack and ship your parts in a sturdy, well-padded box.
- Fill out our Customer Information Sheet and put it inside the box with your parts.
- We recommend adding additional shipping insurance to cover for loss or damage.
- Make sure that you get a tracking number for your shipment, so you know when we receive your package.
- You won’t hear from us when we receive your package unless there is a problem. If there is damage or if any parts are missing, we’ll call you before we start the rebuild to let you know what we’re seeing and discuss any additional repair costs. Otherwise, the first that you’ll hear from us is when the rebuild is complete, and we call to collect credit card payment.
Ship Cylinders To:
Cabriolet Hydraulics
2111 72nd Terrace E
Sarasota, FL 34243